SIZING




T-shirts/sweater

  1. Shoulder width (SHOULDER WIDTH): Measure the between shoulders to the seam in a straight line
  2. Sleeve Length: Measure from the shoulder to the tip of the sleeve in a straight line
  3. Length (BODY 
  4. Body Width: Measure the base on both sides in a straight line and double the number.
  5. Cuff Width: Measure the width of the sleeves in a straight line
  6. Hem Width: Measure the left and right tips of the hem in a straight line



Raglan Sleeve

  1. Sleeve length (Neck to Sleeve): Length from the center of the neck to the tip of the sleeve (one side shoulder width + sleeve length)
  2. Length (BODYlength): Measure from the base of the neck to the hem in a straight line * Maximum part for deformation design
  3. Body Width: Measure the base on both sides in a straight line and double the number.
  4. Cuff Width: Measure the width of the sleeves in a straight line
  5. Hem Width: Measure the left and right tips of the hem in a straight line



Pants

  1. Around The Waist:
    Tighten the zipper button, measure the upper end of the waist horizontally in a straight line, and double the number.
    * Place flat and measure in a natural state without forcing the height (position) of the front body and the back body.
    (Because it will be shaped as shown in the figure when worn)
  2. Ride (Front Rise): Measure from the top of the waist on the front body to the base of the crotch in a straight line
  3. Inseam (Inseam): Measure from the base of the crotch to the hem in a straight line
  4. Around the hip(HIP CIRCUMFERENCE): Tighten the zipper and button, and double the measurement value 7 cm above the base of the crotch.
  5. CROSS WIDTH: Measure the width in a straight line from the base of the crotch
  6. Hem width: Measure the left and right tips of the hem